RRD WH Comp Carbon Set Y25
Full pre preg pitch carbon mast for superior stiffness
Variety of optional components to improve performance and suit any rider's needs
Control at hi speeds
Hi performance full carbon 95 cms mast, 110 cms Alu fuselage and hybrid carbon wings (front wing 726 sqcms/80 cms wingspan, rear wing 281 sqcms/50 cms wingspan). This carbon foil takes a step forward in controlling at higher board speed. It goes up to your personal speed limit with smaller full carbon wings. As optional we provide 2 x additional mast sizes (105 and 85 cms), fuselages, full carbon wings to have all the set ups needed for pure racing.
- 4 separable pieces: mast with deep tuttle head and carbon flat plate base, fuselage, front and rear wings.
- WH hybrid carbon front wing developed for hi performance windfoiling. Easy to control at higher speed and best upwind angle.
- WH hybrid carbon rear wing designed with thin profile and side winglets. Best stability of ride and control from 8 to over 25 knots of speed. The perfect stabilizer for windfoiling.
- Special Freerace Full Carbon 95 cms mast. Hi pressure/temperature compression moulding, using a 30% state of the art pitch carbon M40 fibers layup mixed up with UD carbon fibers. The result is a perfect mix of dynamic stiffness that adapts to the riders skills from intermediate to advanced level.
- Plastic connector at the bottom of the mast allows it to fit to any fuselages from kite to surf foils, and by separating aluminum parts contact it avoids oxidation and corrosion typical when carbon touches aluminum. Longer lifetime, no stuck pieces.
- WH alu fuselage with narrow streamlined leading edge and long&wide wings attachment area. Stiff connection that takes you to hi performance.
- WH COMP PREPREG MAST 95
- WH ALU FUSELAGE 110 CMS
- WH HYBRID CARBON FRONT WING 80/726
- WH HYBRID CARBON REAR WING 50/281
- WH COMP PREPREG MAST 85
- WH COMP PREPREG MAST 105
- WH ALU FUSELAGE 80
- WH ALU FUSELAGE 90
- WH ALU FUSELAGE 100
- WH ALU FUSELAGE 120
- WH HYBRID CARBON FRONT WING 85/768
- WH HYBRID CARBON REAR WING 38/214
- WH-FULL CARBON FRONT WING 80/724
- WH-FULL CARBON FRONT WING 85/768
- WH-FULL CARBON FRONT WING 100/1053
- WH-FULL CARBON REAR WING 50/281
- WH-FULL CARBON REAR WING 38/214
AVAILABLE OPTIONAL PARTS:
1. FRONT AND REAR WINGS LAYUP
- Hi pressure /temperature composite technology of construction. Best strength/durability / lightweight available today. Connection areas between Wings and Fuselage built in solid carbon fibers
- Special Freerace Full Carbon 95 cms mast. Hi pressure/temperature compression moulding, using a 30% state of the art pitch carbon M40 fibers layup mixed up with UD carbon fibers.
- Extra long and wide area on front wing connection to support loads from hi speed foiling and stiffer full carbon wider wings (85 and 100 cms wingspan full carbon front wings available as optional)
Assembled with 3 x screws, simple and easy to assemble/disassemble.
No friction of connecting parts, no wearout, no hammer needed.
- Plastic connector to avoid oxidation between mast and fuselage connection.
3 x screws for best connection: front screw hole with stainless steel helicoil, middle and rear screw holes on brass insert on mast. No oxidation.
3. WING CONNECTION
4. MAST FUSELAGE CONNECTION
|MODEL||MAST||FUSELAGE||FRONT WING SPAN / cm²||BACK WING SPAN / cm²||MOUNT|
|WH COMP SET||95 cm||110 cm||80 cm / 724 cm²||50 cm / 281 cm²||Powerbox|