RRD Dynamic Pro Alu SW Foil 700
- BEST FREERIDE & WAVE TOY FOR KITE FOILING
- SPEED AND SHARP CURVES ON THE WAVES
- PURE PERFORMANCE SURF & WING HYDROFOIL
- NEW DYNAMIC PRO FRONT WING 700 SQCMS FOR PRO RIDERS
The Dynamic Pro Alu SWK is a no compromise foil set. Each component is simply on a league of its own in terms of raw material selection and hydrodynamics up to the point that it suits the most demanding wing, surf and kite - foilers.
The Dynamic Pro front wing profile is the engine of this hi performance foil, designed with a negative dihedral angle turning into a neutral one on the tips. This special wing design with a differentiated dihedral angle is the base for turning potential and stability. You'll fly with control at a higher speed and draw the sharpest turns.
The new Universal Alu 85 mast sets a new standard for aluminium hi-performance masts being 30% stiffer and lighter due to a new profile and light integrated plate. This mast perfectly connects with the fuselage and wings resulting in an ultra rigid set appreciated by most riders out there.
What you are getting is a specialist and performance hydrofoil.
The Dynamic Pro Alu WK 700 has a pure kite spirit. This top level new ALU set is simply a masterpiece in engineering. Mixing our super stiff Universal alu mast with a hi performance front and rear combo of carbon wings designed for fast freeride and wave riding. There is no limit of fun in whatever conditions you may be riding in, as you have a solid platform under your feet which gives that extra confidence for every level of riding. It can also be used from pro level wingfoilers looking for top performances in stronger winds.
Recommended for kitefoilers both in freeride and wave and for professional lightweight wingfoilers.
- UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26 - DYNAMIC PRO CARBON FRONT WING 66,4 /900 Y26 with EVA COVER - UNIVERSAL REAR WING 37/210 Y26 with EVA COVER - UNIVERSAL FUSELAGE 66 with WITH EVA COVER Y26 - M8 TORX SCREWS & KEY SET
- New 700cm2 full carbon Dynamic Pro front wing with camber
- New 210 cm2 Dynamic Pro carbon rear wing
- New 30% stiffer and lighter aluminium mast with integrated plate
- New redesigned 66 cm light Universal fuselage
- Solid connection using 8 mm diameter Torx screws and helicoil threads for mast, fuselage and wings. A reliable, strong and quick to assemble/disassemble connection
- New wider Hi density plastic mast foot connector/adaptor for improved lateral stiffness. No oxidation between mast and fuselage
- Each component comes with an EVA Cover with Velcro to fasten it inside the bag (foil set bag supplied separately).
- The new wider profile and stiffer Universal ALU mast with integrated plate is the top combination for speed potential and superior control. The aluminum plate has been optimized in dimension and integrated into the alu mast using new 8 mm diameter screws to obtain a more solid connection. This mast is 15% lighter and stiffer both in flex and torsion, compared to his predecessor. It has a maximum thickness of 18mm and its profile is also proportionally thicker towards the rear part of the mast in order to minimise twist. We have also introduced a new middle stringer structure in between the two screws that have allowed a higher lateral stiffness. The mast Is now waterproof.
FRONT AND REAR WINGS LAYUP
- If you want to have that feeling of speed matched with control than look no further. Extremely light due to its high density foam core with a 100% carbon shell, the Dynamic Pro carbon front wing is designed for the performance you've always dreamed of. Its profile with a pronounced camber ending with an inverted semi winglet provides a predictable behaviour at higher speeds. Combined with the new Dynamic Pro carbon rear wing you get a combo for both surf and wingfoil experts and all levels of kitefoilers.
REMOVABLE PLATE CONNECTOR / WING CONNECTION
- The new Universal fuselage has an extra wide head area to carry and support super wide wings (up to 120 cms wingspan and 2500 sqcms) and entirely redesigned for maximum lightweight. Its new wider middle and front section design can sustain higher flex pressure and torsion pressure from the input of the mast and front wing and offers an improved level of stifness. Lighter and stiffer!
MAST FUSELAGE CONNECTION
- New 8mm diameter Torx screws and stainless steel helicoil threads for mast, fuselage and wings has improved in connectivity and stiffness and for more user friendly assembly / disassembly. No more damaged screw heads and threads!
MAST FUSELAGE CONNECTION
The new mast foot adaptor Y26 design is now wider for improved lateral stiffness, securing a "one welded piece" feeling between fuselage and mast.
Hi density Plastic connector/adaptors to avoid oxidation between mast and fuselage connection. 2 x 8mm diameter Torx screws for a reliable, strong and quick connection.
FOIL SET BAG (sold separately)
- Our new foil set bag 120 can fit any set and parts of our complete Y26 Hydrofoil collection. There are velcro attachments that will fit and lock every part inside its padded cover so every component of any size will be secure and not move inside the bag.
|Size||Mast||Fuselage||Front Wing Span||Rear Wing|
|700 cm2||85 cm||66 cm||55.5 cm||Span: 37cm / Area: 210cm2|
|Versandgewicht ca.:||3,00 Kg|