JP MonstAir SE 3DS 2022 17'0"x65"x6"
THE MONSTER IS BACK IN TOWN
Our team board appears again as huge as usual! With 17' of length and 65" of width, this board was redesigned with a 6" Triple Layer Composite Drop Stitch to decrease its weight. Call your friends and family, pets are also welcome! Fun times wait ahead with this gentle beast. Windsurf tandem blasting, teaching, paddling river tours, or just using it as your own private island!
The MonstAir comes with 4x 10" fins, 2x Double Action Pump and 1x bag.
- 3D Stringer
- Welded Seam Technology
- 2x Windsurf Mastplugs
- 10x handles and 2 valves
Simple Operation Inflation Valve
- Safe and fast push system to easily inflate the board.
- Super resistant material and color. Supports easy carrying in the inflated state of the board.
- Diamond grooving and fine grooving for better gripping and comfort.
US COMPATIBLE FINBOXES
- Easy mounting finbox system with no need for special tools. Just put the fin inside the box, secure it with the provided screw and, jump onto your board and start paddling.
Superior Edition 3DS
The 3 pre-laminated composite layers consist of 2 airtight PVC sheets bonded to a Polyester 1000D fabric to create one super strong shell. This shell is then machine laminated directly onto the 500D Polyester Drop Stitch fabric. The pre-lamination and the composite structure create an unprecedented weight/stiffness/durability ratio ever produced in an inflatable SUP. The SE 3DS boards are offered in 6" thickness, with the exception of the SurfAir 9'7"x32" (4" thick).
The outside rail layer is glued over the first layer for added stiffness and abrasion resistance.
Triple Layer Composite Drop Stitch
The 2 PVC layers make sure your JP Inflatable is 100% airtight, and the Polyester 1000D fabric in between them creates a super durable composite stretch-resistant structure.
The first rail layer is welded to the DS fabric to ensure a long-lasting mechanical bond.
The 3D stringer is the most innovative solution to increase the stiffness of an inflatable board. It connects the deck, rail and bottom into one strong and solid U-beam. This has increased the stiffness of the boards up to 30%. Furthermore, the 3D Stringer increased the glued overlap surface in the high high-stress standing area, increasing the safety of the boards.
Welded Seam Technology
JP-Australia developed the Welded Seam Technology to increase the durability and airtightness of our inflatable boards. The connection between the rail and the drop stitch material is hot-air welded thus creating a very strong mechanical joint that turns these two parts into one. By fusing two different layers together into one part, the welding process makes the board safer and more durable. The plasticizers in PVC migrate over time and weaken the strength of the chemical bond of the glue.
Our Triple Layer Composite and our Double Layer constructions both include the specially developed process of pre-lamination. This high-tech process consists of machine-lamination of the multiple layers into a shell that has accurate thickness as well as superior abrasion and stretch properties. Compared to normal double layer boards we have been able to remove the manual glue application from the process and with it the room for error, the excess weight of the glue and the additional health hazards for our workers. The fiber-reinforced layers create super strong and durable boards with a minimal amount of stretch.
|MODEL||LENGTH||WIDTH||VOLUME||WEIGHT||THICKNESS||FIN||FIN BOX||WINDSURF MAST PLUG|
|SUPERIOR EDITION 3DS: Triple Layer, 3D Stringer and Welded Seam|
|17'0"||518cm||165cm||1100l||33.4kg||15.2cm||4x 10"||4x US compatible||Yes x2|