Duotone S_Pace 2021

Artikelnummer: 210212010

Kategorie: 2021

Größe

ab 869,00 €

inkl. 19% USt. , zzgl. Versand

UVP des Herstellers: 869,00 €
verfügbar

Lieferzeit: Y

Dieses Produkt hat Variationen. Wählen Sie bitte die gewünschte Variation aus.


Duotone S_Pace 2021 - PERFORMANCE CAM


DAS VIELSEITIGSTE PERFORMANCE CAM SEGEL MIT DER GRÖßTEN WINDRANGE, DAS DU FINDEN WIRST!


Das hoch sportive, kompetitive Slalom Segel mit unglaublichem Vorwärtsdrang - das S_PACE giert nach Geschwindigkeit und lässt sich trotzdem einfach beherrschen. Es trägt die Racing-Gene des WARP für uneingeschränkte Leistungsentfaltung, verfügt aber gleichzeitig über ein für diese Klasse ungewöhnlich angenehmes Handling. Basis bildet das revolutionäre 3 IN 1 DESIGN, das Kai über einen Zeitraum von 3 Jahren entwickelt hat, das eine nie dagewesene Trimmrange ermöglicht. Zusammen mit den drei brandneuen HYPER CAM 2.0 entsteht ein sagenhaft breiter Einsatzbereich: Das S_PACE läßt sich im jeweiligen Windfenster nach unten oder oben optimal trimmen und grundlegend verändern, was es über alle Windbereiche maximale Performance erreichen läßt!
Das neue S_PACE im 3 IN 1 DESIGN ist die perfekte Symbiose aus unseren erfolgreichsten Race Slalom und Freeride Segeln: egal, ob V-Max, maximale Angleitbeschleunigung oder als sportlicher Foil-Motor, das S_PACE ist das vielseitigste Cam-Segel auf dem Markt. Designer Kai Hopf kombiniert in diesem Segel die Spitzenleistung des WARP mit einem sehr ausgewogenen Fahrverhalten und deutlich breiterem Einsatzbereich. Möglich wird dies dank einer stark reduzierten und im oberen Bereich fast geraden Vorliekskurve. Sie bewirkt, dass Veränderungen der Vorlieksspannung einen sehr großen Effekt auf das Achterliek haben. Wenig Spannung bedeutet geringes, viel Spannung deutlich ausgeprägtes Loose Leech. Die zwei extrem weit voneinander liegenden MIN- bzw. MAX-Trimmpunkte belegen, dass das 3 IN 1 DESIGN einen unglaublich breiten Windbereich abdeckt. Mehr noch, das S_PACE zeigt je nach Trimm ein völlig unterschiedliches Angleitverhalten und auch Rigggefühl. Im MIN-Trimm mit gespanntem Achterliek läßt es sich spielerisch anpumpen, beschleunigt sehr effizient und fühlt sich unglaublich leicht an - ideal auch zum Foilen. Im MAX-Trimm hingegen fühlt sich das S_PACE sehr ähnlich dem WARP an, wird immer schneller und hat nach oben keine Grenzen. Drei neue, längenverstellbare HYPER CAMS 2.0 sorgen dabei für einzigartige Druckpunkt- und Profilstabilität bei angenehmer Rotation.
Einzigartig für das neue S_PACE ist auch die stark konisch zulaufende Masttasche im AERO SLEEVE DESIGN 2.0. Ihre Breite im aerodynamisch wichtigen Gabelbaumbereich ermöglicht den idealen Über­gang von der »dicken« Mastvorderkante in das »dünne« Se­gelprofil. Oben im Segel hingegen ist die Masttasche relativ eng gehalten, um schnelle Wasserstarts zu ermöglichen. Un­terstützt wird dies vom LUFF LIFT DESIGN des WARP 20.20, das für zusätzlichen Auftrieb sorgt.
Schlicht­weg genial: Für den Foil-Einsatz gibt es beim S_PACE eine spezielle Öse am Achterliek, um das Segel noch aufrechter fahren zu können!



WHAT'S NEW?

  • IN ADDITION TO THE 3 HYPER.CAM 2.0 THE NEW SLEEVE INDUCER IMPROVES THE AERODYNAMICS AND STABILITY WITHOUT HAVING ANY INFLUENCE ON THE HANDLING
  • MODIFIED PROFILE DISTRIBUTION >> IMPROVED ROTATION, STABILIY AND ACCELERATION
  • LUFF CURVE GOT OPTIMISED >> LIGHTER FEELING AND IMPROVED PLANING POWER



TECHNOLOGY:

  • 3 IN 1 DESIGN
  • FOR AN UNPRECEDENTED TRIM RANGE AND AN EXTREMELY WIDE WIND RANGE

  • HYPER CAM 2.0
  • COMPLETELY NEW AND TECHNICALLY SUPERIOR: THE CAMBER REVOLUTION WITH ADJUSTABLE LENGTH - FOR OPTIMISED ROTATION AND INCREASED PERFORMANCE

  • AERO SLEEVE DESIGN 2.0
  • MAXIMUM PERFORMANCE COMBINED WITH FAST WATERSTARTING

  • HOLLOW LOWER LEECH
  • ENABLES TO REDUCE THE BOTTOM LENGTH WITHOUT LOOSING LOW END POWER

  • IBUMPER 2.0
  • THE MOST ADVANCED AND EFFECTIVE MOLDED MAST PROTECTOR

  • IROCKET 2.0
  • FACTORY CALIBRATED INDIVIDUAL BATTEN TENSIONS USING A TORQUE WRENCH




    mast-brand-compatibilityt:
    At DUOTONE we use a Medium Constant Curve for our masts (our bend percentages range between 61-63 bottom and 75-77 top depending on model and length). As this curve sits right in the middle within Constant Curve masts it offers the biggest compatibility of any bend curve. This makes our masts and sails the most compatible on the market.

    HERE IS HOW GOOD OTHER BRAND MASTS WORK WITH OUR SAILS AND VICE VERSA:

    1. Challenger Sails, Ezzy, GA (2017 on), Goya, Gun Sails, KA Sails, Loft Sails, Naish Sails, NeilPryde (RDM masts), RRD, S2Maui, Sailloft, Sailworks, Severne (2014 on):
    2. 80-90% (depending on model and size)

    3. Hot Sails, NeilPryde (SDM masts), Point7, Simmer Style:
    4. 70-80% (depending on model and size)

    5. Avanti, Gaastra (until 2016), Maui Sails, Severne (until 2013), Vandal
    6. Not compatible



    saillquiver-brand-compatibility:

    Most customers change their individual sail and mast sizes according to demand and therefore end up owning a quiver with different brands. When building up your personal sail quiver, you should try to combine sails that have a similar feel and behavior. The one decisive factor defining how similar or different one sail feels/behaves to another is the position of the draft, in both levels, vertical (high>
    • Freeride and slalom sails from the different brands nowadays feel quite similar since at least the horizontal draft position is forward oriented on nearly every sail today.
    • The biggest difference though you find with wave sails.


    Basically there are 2 different kind of wave sails::

    1. Draft centered (= balanced pull on both hands) and low (to keep the sail controllable)
    2. These sails are the ideal companion for multi-fin boards. Since the balanced pull on both hands makes them super neutral in your hands they shine especially in real down the line conditions. On the other hand they feel very different to modern freeride and slalom sails (which are very forward pulling). So if you are using such draft back/low wave sails only very occasionally as your high wind flat water sail you might be better off with the second type of wave sails.

    3. Draft forward and up (to still generate enough low end power)
    4. These sails work on both single- and multi-fin boards. With the forward pulling feeling they are more exiting/direct to sail and have a very similar feeling to modern freeride and slalom sails. In addition they are the ideal choice for side-onshore jumping conditions as the higher and off-center oriented draft helps/accelerates rotations in the air (especially forward/backward loops).

    So when mixing your quiver with different sails/brands you should try to combine sails which have a similar draft position and thus feeling and behavior.


    Just follow these guidelines:

    1. You are looking for a direct feeling wave sail especially for jumping. Or you need a smaller sail to complete your freeride or slalom sails. Try to get draft forward/up wave sails. Typical examples are:
      Duotone Super Star / NP Zone / NP Combat / NP Atlas / Point7 Salt / Point7 Spy / Severne S1 / Severne Blade
    2. You are looking for a wave sail which is super neutral for down the line riding and very forgiving in nuking gusty conditions. Try to get draft centered/low wave sails. Typical examples are:
      Duotone Super Hero / GA IQ / GA Manic / Goya Fringe / Goya Banzai / Simmer Tricera / Simmer Blacktip / Simmer Icon
    3. Try to avoid combining draft forward/up- with draft centered/low sails in your quiver as these feel and behave extremely different.
    sail-compatibility

    DETAILS:

    SIZES BOOM MAX LUFF MAX VARIO TOP BATTENS CHAMBER WEIGHT MAST TYPE RDM/SDM MAST LENGTH
    6.0 192 cm 440 cm fix 7 3 + 1 Sleeve Inducer 5 kg Platinum/Gold>Silver SDM/- 430/-
    6.6 202 cm 462 cm fix 7 3 + 1 Sleeve Inducer 5.2 kg Platinum/Gold>Silver SDM/- 430/460
    7.3 210 cm 474 cm fix 7 3 + 1 Sleeve Inducer 5.4 kg Platinum/Gold>Silver SDM/- 460/-
    7.8 220 cm 488 cm fix 7 3 + 1 Sleeve Inducer 5.6 kg Platinum/Gold>Silver SDM/- 460/-
    8.3 226 cm 500 cm fix 7 3 + 1 Sleeve Inducer 5.8 kg Platinum/Gold>Silver SDM/- 490/460
    8.8 232 cm 512 cm fix 7 3 + 1 Sleeve Inducer 6 kg Platinum/Gold>Silver SDM/- 490/-
    9.3 244 cm 524 cm fix 7 3 + 1 Sleeve Inducer 6.2 kg Platinum/Gold>Silver SDM/- 490/-


    TECH FEATURES:

    beschreibung
    1. 3D TOP CAP
    2. Optimised pull. On regular top caps and pin systems the webbing is connected in a "one-dimensional" way with the sail body (either side to side or front to back), which transfers the downhaul tension only in certain points. The 3D TOP CAP allows a "three-dimensional" and very widespread transition of the downhaul forces into the sail body. This eliminates top fluttering and ensures a progressive loose leech extending the wind range. The integrated abrasion ribs eliminate the need for heavy, bulky reinforcements at the end of the luff sleeve.

    3. TT TOP
    4. Improved sail control at higher winds. Designer Kai Hopf originally designed the TT TOP for the WARP. The reduced, concave shape improves tension conditions for a more effective, three-dimensional top twist. This means the top twists not only horizontally, but also vertically under strong winds. By completely neutralising gusts of wind, the rig is kept steady in the rider?s hands, and thus works in a much larger range of winds.

    5. POLYESTER WEBBING ONLY
    6. Eliminating stretch and loss of tension. If it's good enough for safety harnesses, it's good enough for windsurfers! We are the only manufacturer to use only polyester webbing for the (vario) top and the tack roller. This advantage of this compared to conventional polypropylene is the negligible amount of stretch. As a result even brand new sails will retain full luff tension and will not need subsequent trimming.

    7. VTS VISUAL TRIM SYSTEM 2.0
    8. Extremely stable, extremely break-resistant. Depending on the range of use, positioning in the sail and the necessary tension, the batten stress is enormous. In order to prevent breakages, we only fit into all solid battens extremely durable epoxy laminates which really can withstand anything and can live up to DUOTONE's promises in terms of longevity.

    9. IROCKET 2.0
    10. Super-lightweight and aerodynamic.

      An inconspicuous detail with a massive impact. iROCKET 2.0 batten tensioners are super-lightweight, aerodynamic and highly stable, consisting of high-quality components such as a self-lubricating, salt-water-resistant brass nut with stainless-steel screw which can withstand all batten tensions. Furthermore, the iROCKET 2.0 is an essential component for a true windsurfing revolution.

      100% correct batten tension, correctly adjusted when purchased and forever after. We calibrate each individual batten at the factory according to development specifications. And we don't just leave it up to blind intuition either - all battens are adjusted to 100% accuracy using torque wrenches. We also apply soluble screw adhesive to the locknuts so that the tension cannot be altered. This means that the batten tension remains absolutely correct and will never have to be adjusted again. The batten key included with the sail is therefore only needed for fine tuning or in the unlikely event of a batten breakage.

      Short and highly effective mini-battens which provide support for the areas between the battens and prevent undesirable flutter.

    11. MINI BATTEN
    12. These prevent unwanted leech flutter.

      Short and highly effective mini-battens which provide support for the areas between the battens and prevent undesirable flutter.

      You won't find a quicker or more accurate way of trimming your sail. Even beginners can trim the sail in a matter of seconds to 100% accuracy. All you need to do is pull the luff until the top of the loose leech reaches the "lower wind limit" or "upper wind limit". The VTS acts as a power boost, ensuring maximum performance and broader range of use.

    13. DOUBLE SEAM TECHNOLOGY
    14. Double the durability with half as much stretch. DUOTONE manufactures products of unmatched quality which gives our sails a significantly longer lifetime. A key feature which helps to achieve this is the triple-stitch zig-zag seams. Unlike other products with their single-seam design, these are double-seam. They cover all exposed crash areas, which increases tear resistance and reduces bending-elongation by up to 50%, boosting profile stability and performance.

    15. PROGRESSIVE CUTAWAY CLEW INCL. CROSS BATTEN
    16. Optimum combination of minimised rotation forces, power, and handling. The CROSS BATTEN concept is the intelligent solution that shifts the draft position downwards while supporting the large surface area in the boom area. It also allows for an early planing profile without losing handling. Ideal in combination with the PROGRESSIVE CUTAWAY CLEW which has an extremely positive influence on the sail's agility and handling, and allows for a shorter, more rigid boom. Both features vary depending on the sail type and size. That is, the more pronounced the CUTAWAY and the longer the CROSS BATTEN, the more flex and comfort achieved, especially when overpowered ("excess" sail area "flexes away" in a controlled manner). The more the sail is geared towards performance, the less pronounced both components are to ensure a more direct acceleration.

    17. X.PLY PLUS
    18. What would you prefer? Maximum puncture resistance and UV weathering resistance with minimal stretch? Or (theoretically) improved ripstop properties?

      We went with option A and developed the most durable laminate on the market. Because the factors of puncture resistance, durability and stretch evidently depend only on the thickness of the film used, we use only 150 or 100 micron thick films for our exclusive XPLY PLUS. In an extensive series of tests, we have developed the ideal combination of necessary film thickness and number of threads. The X.PLY PLUS in particular, at 150 microns in thickness, boasts durability characteristics far in excess of previous laminates at minimal weight. This is also acknowledged by all the big surfing centres and rental equipment providers around the world, who place their trust in the unbeatable quality and longevity of our sails.

    19. HYPER CAM 2.0
    20. Optimum performance and camber rotation at any time! HYPER CAM 2.0 is the camber revolution for even more sail performance. The secret is a variable slider which gets adjusted via a Torx stainless steel screw, determing the camber length (patent pending). Further extended results in maximum propulsion, slightly shortened optimizes the rotation. The difference is clearly noticeable and has a great influence on the performance level of the sail. The camber length can be changed by anyone within seconds and adjusted to his preferences, even under full sail tension. Despite this unique additional function, the HYPER CAM 2.0 is only slightly heavier since the housing is weight-optimized. But that's not all that it offers:

      Advantage 1:
      Super-fast rigging up (only rolling on instead of snapping on) without having to correct luff and outhaul tension multiple times.
      Advantage 2:
      Minimal friction and very gentle batten rotation, since the HYPER CAM has exposed pulleys without plastic braces and only the pulleys touch the mast.
      Advantage 3:
      Optimised shape for the best possible luff sleeve profile and ideal aerodynamics.
      Advantage 4:
      Suitable for all mast diameters because only the pulleys touch the surface and never the plastic structures themselves, allowing the HYPER CAM to rotate with extreme ease.
      Advantage 5:
      Fast and easy length adjustment for individual tuning of max. performance vs. ease of rotation.
      Attention: due to new batten attachment not retrofitable to HYPER CAM 1. generation sails.

    21. MAST SLEEVE OPENER
    22. Frictionless insertion of the mast into the luff sleeve. An ingenious solution does away with the tedium of inserting the mast. The DUOTONE logo above the boom cutout gently opens the sleeve so that the mast can be threaded with one hand into the luff friction-free, without having to constantly make adjustments to the luff.

    23. INDIVIDUAL BOOM LENGTH INDICATION
    24. The correct boom length without the need for trial and error. Because the boom is attached to the mast at different heights depending on body size, and because this creates a different angle to the mast, the boom length will vary. Specific recommendations for the correct length are printed directly on the luff sleeve at the boom level.

    25. HTS 2.0 HARNESSLINE TRIM SYSTEM
    26. Never position your harness lines incorrectly again. Do away with the tedium of adjusting to the optimum rope position, as well as the numb forearms and the endless fiddling around. The patented print on the sail shows exactly where the centre of the harness line has to be. All you need to do is position the two ends symmetrically at the left and right of the print.

    27. HYPER CAM 2.0
    28. Optimum performance and camber rotation at any time! HYPER CAM 2.0 is the camber revolution for even more sail performance. The secret is a variable slider which gets adjusted via a Torx stainless steel screw, determing the camber length (patent pending). Further extended results in maximum propulsion, slightly shortened optimizes the rotation. The difference is clearly noticeable and has a great influence on the performance level of the sail. The camber length can be changed by anyone within seconds and adjusted to his preferences, even under full sail tension. Despite this unique additional function, the HYPER CAM 2.0 is only slightly heavier since the housing is weight-optimized. But that's not all that it offers:

      Advantage 1:
      Super-fast rigging up (only rolling on instead of snapping on) without having to correct luff and outhaul tension multiple times.
      Advantage 2:
      Minimal friction and very gentle batten rotation, since the HYPER CAM has exposed pulleys without plastic braces and only the pulleys touch the mast.
      Advantage 3:
      Optimised shape for the best possible luff sleeve profile and ideal aerodynamics.
      Advantage 4:
      Suitable for all mast diameters because only the pulleys touch the surface and never the plastic structures themselves, allowing the HYPER CAM to rotate with extreme ease.
      Advantage 5:
      Fast and easy length adjustment for individual tuning of max. performance vs. ease of rotation.
      Attention: due to new batten attachment not retrofitable to HYPER CAM 1. generation sails.

    29. DURATECH FOOT
    30. Long-term guarantee for the sail foot. When starting off on the water or catching up, the foot of the sail is constantly dragged over the nonslip coating, particularly for wide boards. With the exclusive DURATECH FOOT, the seams are completely protected within a large plastic channel so that the surface cannot chafe against seams and material.

    31. HYPER CAM 2.0
    32. Optimum performance and camber rotation at any time! HYPER CAM 2.0 is the camber revolution for even more sail performance. The secret is a variable slider which gets adjusted via a Torx stainless steel screw, determing the camber length (patent pending). Further extended results in maximum propulsion, slightly shortened optimizes the rotation. The difference is clearly noticeable and has a great influence on the performance level of the sail. The camber length can be changed by anyone within seconds and adjusted to his preferences, even under full sail tension. Despite this unique additional function, the HYPER CAM 2.0 is only slightly heavier since the housing is weight-optimized. But that's not all that it offers:

      Advantage 1:
      Super-fast rigging up (only rolling on instead of snapping on) without having to correct luff and outhaul tension multiple times.
      Advantage 2:
      Minimal friction and very gentle batten rotation, since the HYPER CAM has exposed pulleys without plastic braces and only the pulleys touch the mast.
      Advantage 3:
      Optimised shape for the best possible luff sleeve profile and ideal aerodynamics.
      Advantage 4:
      Suitable for all mast diameters because only the pulleys touch the surface and never the plastic structures themselves, allowing the HYPER CAM to rotate with extreme ease.
      Advantage 5:
      Fast and easy length adjustment for individual tuning of max. performance vs. ease of rotation.
      Attention: due to new batten attachment not retrofitable to HYPER CAM 1. generation sails.

    33. IBUMPER 2.0 (COMBINED WITH VTS 2.0)
    34. A real innovation that offers additional value is the new iBUMPER 2.0, since in addition to its function as a lightweight and reliable mast protector it is also useful as a trimming tool. After stretching on a new sail, the best indicator for optimum trim is the position of the mast end at the height of the protector. For this reason, the new iBUMPER 2.0 now has a vinyl viewing window so that the lower edge of the mast can be identified. Once the perfect trim has been found, the optional Velcro patch can be used to "save" this position - saving time and ensuring maximum performance.

    35. TWIN STRAP
    36. This keeps the sail rolled up and holds the protector to the mast. A brilliantly simple fastening system which keeps the sail compact and closed after being rolled up and, when on the water, holds the mast protector closely to the mast.

    37. POLYESTER WEBBING ONLY
    38. Eliminating stretch and loss of tension. If it's good enough for safety harnesses, it's good enough for windsurfers! We are the only manufacturer to use only polyester webbing for the (vario) top and the tack roller. This advantage of this compared to conventional polypropylene is the negligible amount of stretch. As a result even brand new sails will retain full luff tension and will not need subsequent trimming.

    39. TRIPLE TACK ROLLER
    40. Find the perfect trim with minimal effort.

      The integrated, nickel-plated brass triple roller minimizes the downhaul forces tremendously.


    VTS MIN TRIM

    LOW DOWNHAUL TENSION:

    LEADS TO:
    • TIGHT LEECH (= REDUCED SAIL TWIST)
    • REDUCED SAIL- AND MAST PRE-TENSION (= INCREASED MAST TWIST)
    • DRAFT SLIGHTLY FURTHER BACK
    ON THE WATER:
    • MAXIMUM LOW END POWER/PULL
    • EASIER AND MORE EFFICIENT TO PUMP
    • SOFTER AND MORE COMFORTABLE TO SAIL IN LOW END CONDITIONS (VERY EFFICIENT ESPECIALLY ON FREERIDE BOARDS LIKE E.G. FANATIC GECKO)
    • TIGHT LEECH IDEAL FOR FOIL USAGE (ESPECIALLY IN COMBINATION WITH THE ADDITIONAL LOWER CLEW FOIL EYELET)


    VTS MAX TRIM

    HIGH DOWNHAUL TENSION:

    LEADS TO:
    • PRONOUNCED LOOSE LEECH (= INCREASED SAIL TWIST)
    • HIGH SAIL- AND MAST PRE-TENSION (= REDUCED MAST TWIST)
    • DRAFT SLIGHTLY FURTHER FORWARD
    ON THE WATER:
    • MAXIMUM HIGH-END-CONTROL / V-MAX
    • MORE FORWARD AND DIRECT PULL FOR EXPLOSIVE ACCELERATION WHEN POWERED UP (VERY EFFICIENT ESPECIALLY ON FREERACE BOARDS LIKE E.G. FANATIC BLAST)

    Versandgewicht: 6,00 Kg